5 Tips to Make Your Home Weather Resistant

A well-maintained home is not only good-looking but also weather-resistant. It protects us from harsh climates, heavy rains, and storms. People use several techniques to make their homes weatherproof. Here are also some easy and cheap ways to make your home withstand extreme weather conditions:

Repair the Cracks and Gaps

The very first step is to check the entire home, its walls, windows, doors, and roof. The goal is to find the cracks and gaps in them. When you find any holes, repair them immediately. During rain or storms, air or water can enter from these cracks and damage other items in the home.

These gaps not only allow coldness in the home but also result in mold and algae formation. You can fill these gaps with caulk or other sealants. Furthermore, you can use cement to fill the cracks.

Insulate Your Home

The next step is to insulate your home. There are several ways to insulate your home. The following are some of them:

Use pipe thermal insulation.
Fill the cavities in the walls and fit hard insulated boards on the wall.
For roofs, use the mineral woolen insulation.
Install drafts in the doors and windows and seal them.
Use window coverings to insulate them.
Coat the walls and roofs with silicone coatings for humidity and water resistance.

Moreover, if you find any other air entry, you have to insulate it.

Coat the Home

You can coat your home from all sides through reflective insulation. Simple insulation is not enough in some areas. The heat from the sun should be reflected to prevent the heating up of the inside of the house.

There are several materials that not only insulate heat or cold but reflect into the air. Usually, aluminum foil or aluminized polyester are used for reflective insulation. Their sheets are simply cut into the size of roofs and walls. Then, staple the sheets on the walls.

However, you can hire a company that provides weather and waterproofing.

Ventilate Properly

You have to control moisture for proper insulation in your home. You can both increase and decrease moisture through adequate ventilation. There are three common ways to decrease the humidity in your home:

Exhaust fans should be installed in high-humidity areas, such as kitchens and washrooms.
You can install dehumidifiers in highly damp areas, such as basements and under roofs.
Sometimes, you can use windows or doors for proper air circulation.

Install Smart Thermostat

You should buy a smart thermostat for controlling the temperature inside your house. Moreover, the thermostat should be automatically closed after a specific temperature. In this way, it will not only control the temperature of your house but also save a lot of energy.

Moreover, you can schedule it according to your routine.

Conclusion

You have to clean the gutters of the roof and the sides of the walls. These can also cause dampness due to the rainwater on the roof and wall. You can use gutter guards to prevent the water and debris collection there.

You will find many other techniques to protect your house against harsh weather conditions.